I-jet
デバッグプローブがIAR Embedded Workbench for Armの優れた機能を使用可能に。
01
IAR Embedded Workbenchのネイティブサポート
統合開発ツールが開発ワークフローを簡素化します。IARの高機能インサーキットトレースデバッグ用プローブを使えば、IAR Embedded Workbench for ARMの強力な機能を存分に使えるようになります。
02
クラス最高の処理能力
I-jetは、JTAGおよびSWD/SWO経由の高速デバッグプラットフォームを提供します。最大ダウンロード速度1.89 MByte/秒で、60MHzまでのSWOクロック速度に対応。JTAGおよびSerial Wire Debug (SWD)のクロック速度は最大32MHz。MCUクロック速度には制限はありません
03
広範なArmサポート
自動コア認識とJTAG/SWD検出により、すべてのシリコンベンダのあらゆるArm7/Arm9/Arm11、Arm Cortex-A/R/Mコアをサポート。ARM Cortex-M0+用マイクロ トレース バッファ(MTB)にも対応しています。
04
パワーデバッグ
パワーデバッグ機能を使って、組み込みシステムへのソフトウェア実装時にシステムの消費電力に及ぼす影響を情報として得ることができます。I-jetから最大容量400ｍAのターゲット電源を供給可能で、200 kHz時、最小分解能200 Aで消費電力を測定できます。
Details and probe comparison
Specifications
General
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| USB connection | High Speed USB 2.0 | SuperSpeed USB 3.0 | SuperSpeed USB 3.0 | SuperSpeed USB 3.0 |
| USB speed | 480 Mbps | 5 Gbps | 5 Gbps | 5 Gbps |
| Powered through USB | ✔ | ✔ | ✔ | ✔ |
| Maximum target power (5V) supplied | 400 mA | 400 mA | 400 mA | 600 mA |
| First supporting version of IAR Embedded Workbench for Arm |
6.30.8 | 7.30.3 | 7.80.1 | 7.70.1 |
Included adapters
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| MIPI-10 | ✔ | ✔ | ✔ | ✔ |
| MIPI-20 | ✔ | ✔ | ✔ | ✔ |
| Mictor-38 | ✔ |
Optional adapters
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| MIPI-20 to ARM-20 | Available | Available | Available | Available |
| MIPI-20 Isolated (ETM not supported) | Available | Available | Available | Available |
Core support
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| Arm7/Arm9/Arm11 | ✔ | ✔ (no ETM trace) | ✔ (no ETM trace) | ✔ (no ETM trace) |
| Arm Cortex-M | ✔ | ✔ | ✔ | ✔ |
| Arm Cortex-R | ✔ | ✔ (1/2/4 bit ETM trace only) | ✔ (1/2/4 bit ETM trace only) | ✔ |
| Arm Cortex-A | ✔ | ✔ (1/2/4 bit ETM trace only) | ✔ (1/2/4 bit ETM trace only) | ✔ |
Interfaces
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| JTAG | ✔ | ✔ | ✔ | ✔ |
| SWD | ✔ | ✔ | ✔ | ✔ |
| cJTAG | ✔ | ✔ | ✔ | ✔ |
| SWO UART/Manchester encoding | ✔ | ✔ | ✔ | ✔ |
| Target debug I/O voltages supported | 1.65V to 5.5V | 1.2V to 5V | 1.2V to 5V | 1.2V to 5V |
Trace features
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| ETM trace buffer | 64 MB | 256 MB | 256 MB | |
| Trace data collection | 1,2, and 4-bit | 1,2, and 4-bit | 1,2,4,8 and 16-bit | |
| Maximum ETM trace clock | 150 MHz | 150 MHz | 350 MHz | |
| Maximum ETM bandwidth | 1.2 Gbps | 1.2 Gbps | 11.2 Gbps | |
| Automatic clock/data skew adjustment | ✔ | ✔ | ✔ | |
| Automatic clock/data threshold adjustment | ✔ | |||
| ETB/MTB Trace support | ✔ | ✔ | ✔ | ✔ |
Performance
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace Arm | |
| JTAG/SWD speed | 48 MHz | 100 MHz | 100 MHz | 100 MHz |
| SWO sampling frequency | 96 MHz | 200 MHz | 200 MHz | 200 MHz |
| SWO max. bandwidth | ~30 Mbps | ~60 Mbps | ~60 Mbps | ~60 Mbps |
| Download speed (RAM) | 1.89 MByte/s | 3.73MByte/s | 3.73 MByte/s | 3.73 MByte/s |
| Power sampling resolution | ~160 µA | ~160µA | ~160 µA | ~160 µA |
| Power sampling rate | 200 ksps | 200 ksps | 200 ksps | 200 ksps |
Functionality
| I-jet | I-jet Trace CM L | I-jet Trace CM XL | I-jet Trace for Arm | |
| Automatic core recognition | ✔ | ✔ | ✔ | ✔ |
| Code breakpoints | ✔ | ✔ | ✔ | ✔ |
| Data breakpoints | ✔ | ✔ | ✔ | ✔ |
| Flash breakpoints | ✔ | ✔ | ✔ | ✔ |
| Interrupt logging | ✔ | ✔ | ✔ | ✔ |
| Data logging | ✔ | ✔ | ✔ | ✔ |
| Call stack trace | With ETB | ✔ | ✔ | ✔ |
| Cycle counter (For Cortex-M devices) | ✔ | ✔ | ✔ | ✔ |
| Code coverage | Sampled/Full with ETB/MTB | Full | Full | Full |
| Function profiling | Sampled/Full with ETB/MTB | Full | Full | Full |
| Instruction trace | Limited with ETB/MTB | Full | Full | Full |
製品／見積もりに関する問い合わせ
製品に関するお問い合わせや見積もりのご依頼は、以下のフォームに必要事項をご記入の上、送信ボタンをクリックしてください。 ＊は必須項目となっています
製品の詳細をお知りになりたいですか?
グローバルに展開するIARが世界各地のお客様をサポートします。製品に関するお問い合せには、常時お答えしています。
Related products
Additional information
CE and RoHS compliance
Our debug probes I-jet, I-jet Trace and I-scope are in compliance with:
CE: EMC Directive 2014/30/EU on the following test standards for IT product:
EN 55022:2010/AC:2011, EN 61000-3-2:2014 & EN 61000-3-3:2013
EN 55024: 201++A1:2015
CE: RoHS 3 Directive (EU) 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, including all applicable amendments—Directive (EU) 2015/863
FCC: the requirements of 47 CFR Part 15 regulation & ANSI C63.4 for the evaluation of Class A of electromagnetic compatibility.
Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorization and Restriction of Chemicals (REACH).
Regulation (EC) No 850/2004, (EU) No 519/2012 of the European Parliament and of the Council on Persistent Organic Pollutants (POPs )
US provision to the Wall Street Reform and Consumer Protection Act (ref: Dodd-Frank Act 1502 on conflict minerals)
SJ/T 11363-2006 for Management Methods for Controlling Pollution by Electronic Information Products (China RoHS)
Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on Waste Electrical & Electronic Equipment (WEEE)
We keep working together with our partners and suppliers to fulfill our responsibility to ensure our are products in compliance with the above directives, regulations and requirements.
Connectors and adapters
I-jet and I-jet Trace has a MIPI-20 connector on the front panel and come with MIPI-20 and MIPI-10 cables. For I-jet Trace, only the MIPI-20 cable supports the ETM trace functionality, and MIPI-10 is for plain JTAG/SWD/SWO debugging. For details on the connectors, see the user manual.
In addition, the following adapters are available from IAR to fit different target connectors:
| ADA-MIPI20-ISO Adapter |  |
| ADA-MIPI20-ARM20 | |
|
ADA-MIPI20-RISCV12 |
|
|
ADA-MIPI20-RISCV24 |